RFQ Foundry
Home / Report

State of Job Shop Websites 2026: 56% give buyers no way to request a quote

We reviewed 12,382 US manufacturing websites. Most fail a buyer's first checks. Here's the data, and five cheap fixes.

A review of 12,382 US manufacturing websites · Published November 2026

The short version: most shop websites fail a buyer's first test

Industrial buyers build their supplier shortlists online, often before contacting anyone. So we asked a simple question: when a buyer lands on a US job shop or OEM website, does it give them what they need to send an RFQ?

We reviewed 12,382 US metalworking and manufacturing websites, and focused on the 4,547 that are job shops or OEMs selling to other businesses. On the pages a buyer typically skims, the answer was usually no.

  • 56% showed no visible way to request a quote.
  • 69% didn't name a single certification: no ISO 9001, AS9100, ITAR or anything else.
  • 38% had under 300 words of text, too little to describe capabilities.
  • 19% of sites showing a copyright year showed 2021 or earlier.

Get the report by email, with the charts as images you can share, and the 2027 edition when it's out.

56% show no visible way to request a quote

We looked for any visible request-for-quote path on the homepage and up to two key pages: a "request a quote" link or button, an RFQ form, or an invitation to upload drawings. Shops serving demanding industries did best, and OEMs selling their own products did worst.

Share of websites with no visible way to request a quote
All 12,382 sites
68%
Job shops and OEMs
56%
OEMs
64%
Job shops
54%
Machine shops
49%
Serving aerospace, defense, medical, energy
47%

Pages read: homepage plus up to two About, Capabilities or Services pages.

The gap matters because buyers usually send the same RFQ to several suppliers. A buyer who can't see how to send a drawing in a few seconds simply sends it to someone else.

69% don't name a single certification

Certifications are among the first things industrial buyers check. Yet 69% of job shop and OEM websites named none on the pages we read. Even among the 995 shops that said they serve aerospace, defense, medical or energy customers, 44% named no certification at all.

Share of job shop and OEM websites naming each certification
ISO 9001
22%
ASME
7%
AS9100
6%
ITAR
6%
AWS welding codes
2%
Nadcap
2%
IATF 16949
1%
CMMC
1%
ISO 13485
1%

Base: 4,547 job shops and OEMs.

Some of these shops certainly hold certifications they don't mention. That's the point: a buyer comparing a dozen supplier websites doesn't dig for a certificate PDF. If it isn't visible, it doesn't count.

38% say too little for buyers, or AI tools, to recommend them

38% of job shop and OEM websites had under 300 words of text across the pages we read: the homepage plus up to two About, Capabilities or Services pages. That's not enough to describe even one capability properly, let alone machines, materials, tolerances and industries. Search engines and AI tools can't recommend a shop for work its website doesn't describe.

Age shows too. Of the sites that displayed a copyright year, 19% showed 2021 or earlier and 10% showed 2018 or earlier. An old copyright line isn't proof of an outdated site, but buyers notice it, and it often signals a website nobody is looking after.

Five cheap fixes that close the gap

The quickest wins aren't expensive. 1. State what you make in the first line of your homepage. 2. Put your certifications where buyers can see them. 3. Write a page for each capability with real numbers: machines, sizes, materials and tolerances. 4. Put a clear way to send an RFQ with drawings on every page. 5. Make sure someone answers every RFQ quickly and follows up after the quote.

If you'd like to see how your own website compares, book a 15-minute fit call and we'll go through it against these numbers with you.

How we did the research

We collected 21,005 US metalworking and manufacturing businesses from Google Maps searches across 692 cities in October 2026, using search terms such as metal fabricator, machine shop, steel fabricator and sheet metal. Of these, 14,378 had their own website, and 12,382 of those sites loaded when we visited them, using a real browser where a site needed one.

For each site, we read the homepage plus up to two About, Capabilities or Services pages. An AI classification model judged what kind of business it is (job shop, OEM, structural steel, local custom work, automotive, supplier or other), how much it sells to other businesses, and whether it's a large multi-site company. Simple text checks found visible quote paths, certification names and copyright years.

Core figures cover the 4,547 job shops and OEMs that mainly sell to other businesses and aren't large multi-plant groups. Like any automated review, it has limits: it reads only the pages above, and the AI classification is not perfect. We've kept the method simple so the numbers are easy to check.

Questions

How did you choose the websites?

We started from 21,005 US metalworking and manufacturing businesses listed on Google Maps across 692 cities, kept the 14,378 with their own website, and analysed the 12,382 whose sites loaded.

Could a shop have an RFQ form we missed?

Yes. We read each homepage plus up to two About, Capabilities or Services pages, which is roughly what a buyer skims before deciding. A quote form deeper in the site doesn't count here, because many buyers never get that far.

Can I see how my own website compares?

Yes. Book a 15-minute fit call and we'll go through your site against these numbers with you.

Find out in 15 minutes if we can help

A short video call. We look at your website the way a buyer would, tell you the three biggest fixes, and say which package fits, or that none does.

Book a 15-minute fit call

Free. No obligation.

Want the numbers first? See every price