Aerospace buyers check your quality system before your machines
If a buyer can't find your AS9100 certificate within seconds, many assume you don't have it and move on.
Aerospace buyers look for proof of a quality system first. That means AS9100 certification, stated clearly with the revision and your certification body, and ideally your certificate available to download. If you perform special processes such as heat treating, chemical processing, non-destructive testing or welding, they'll look for Nadcap accreditation for those processes.
Next they check capability in aerospace terms: the materials you machine or form (aluminum 7075 and 6061, titanium Ti-6Al-4V, Inconel and other nickel alloys, stainless steels), the part sizes and tolerances you hold, and your inspection equipment. First article inspection to AS9102 is expected on new parts, so they want to see that you do it routinely.
Finally, they check that you can handle the paperwork that comes with aerospace work: material certifications and traceability, customer flow-down requirements, counterfeit parts prevention, and on-time delivery. For defense-related aerospace work, they'll also look for ITAR registration.
How aerospace and space buyers find suppliers
Aerospace buyers check you in the OASIS database, search Google and AI tools, then read your website before any call.
Aerospace work flows down a supply chain. Primes and their tier 1 suppliers buy assemblies and systems, and push the machining, fabrication and special processes down to tier 2 and tier 3 shops. Your buyer is usually a supply chain or procurement specialist working with a manufacturing or quality engineer, and they're often trying to add a second source, recover a late program or move work closer to home.
Before anyone sends you an RFQ, they check whether you're qualified. Many look you up in the IAQG's OASIS database, which lists AS9100-certified suppliers. They search Google for the process and material they need, increasingly ask AI tools for shops that can do it, and look at your website to confirm. Trade shows and referrals from engineers who've worked with you still matter, but even a referral will visit your site before the first call.
The space sector adds a newer kind of buyer: venture-funded launch and satellite companies that move fast, need prototypes and short runs, and source a lot of work through online search. They care about speed and engineering responsiveness as much as paperwork.
Questions your buyers will ask, answered before they ask
Aerospace buyers usually ask: Are you AS9100 certified, and by whom? Which special processes do you perform in-house, and are they Nadcap accredited? Do you perform first article inspection to AS9102? Can you work to our flow-down requirements and provide full material traceability? What's your on-time delivery rate?
Every one of those questions can be answered on your website before a buyer picks up the phone. When they are, your first call is about the part, not about whether you're qualified.
Most aerospace suppliers hide the certifications that win the work
Shops spend years earning AS9100 and Nadcap, then bury them where buyers never look.
In our review of US manufacturing websites, 995 job shops and OEMs said they serve aerospace, defense, medical or energy customers. 44% of them didn't name a single certification on the pages we read, and 47% didn't show a visible way to request a quote. Across all 4,547 core job shops and OEMs, only 294 named AS9100 and 75 named Nadcap.
Some of those shops certainly hold certifications they don't mention. That's the problem: an aerospace buyer scanning a dozen supplier sites doesn't dig through PDFs to find out. If AS9100 isn't visible on your homepage and your quality page, many buyers assume you don't have it and move on.
Source: RFQ Foundry review of 12,382 US metalworking and manufacturing websites, Oct to Nov 2026. Core figures cover the 4,547 job shops and OEMs selling to other businesses. We read each homepage plus up to two About, Capabilities or Services pages. Read the report.
The mistakes that cost suppliers RFQs
The most common mistake is hiding the certificate. Shops spend years and significant money on AS9100 and Nadcap, then mention them once in a footer logo. The second is describing capability in commercial terms, such as "precision machining", without the materials, envelopes and tolerances an aerospace engineer needs to judge fit.
The third is the RFQ path. Aerospace RFQs carry drawings, revision levels, quantities and certification requirements, and often controlled data. A generic contact form that asks only for a name and message, with no file upload and no instructions for controlled drawings, signals that the shop isn't used to aerospace work.
What your website needs to show aerospace and space buyers
An aerospace buyer should be able to answer four questions from your homepage alone: what you make, for which part of the aerospace market, under which certifications, and how to send a drawing. Beneath that, the site needs a page for each core capability, written in the language of aerospace drawings: materials and conditions, part envelopes, tolerances, surface finishes and the inspection you perform.
A dedicated aerospace page explains the programs and platforms you support, as far as you're allowed to say, and the kinds of parts you make for them, such as structural brackets, housings, fittings or engine components. A quality page carries the weight of the site: AS9100 certificate, Nadcap accreditations, first article process, inspection equipment, calibration and traceability. Many aerospace shops also benefit from a separate page for space hardware, because launch and satellite buyers search and buy differently from airframe and engine buyers.
What we build and run for aerospace and space suppliers
We rebuild your website around the questions an aerospace buyer asks. Your homepage states your certifications and the aerospace work you do in the first lines. Each capability gets its own page with materials, sizes, tolerances and the machines you run it on. Your quality page covers AS9100, Nadcap special processes, first article inspection, inspection equipment and traceability, with certificates to download.
Each month, on the Manufacturers and OEMs package, we publish 2 to 4 articles written for aerospace engineers and buyers: machining guides for titanium and nickel alloys, what to include in an aerospace RFQ, how your first article process works. These rank for the searches your buyers make and give your sales team something useful to send.
We also set up your RFQ form to ask for the information aerospace quotes need, such as material, quantity, revision and certification requirements, and to tell buyers how to send ITAR-controlled drawings securely instead of uploading them through the form.
Articles we'd write in your first three months
On the Manufacturers and OEMs package, these are typical of the 2 to 4 articles we'd publish each month for an aerospace machine shop, chosen from what your buyers search for:
- Machining titanium Ti-6Al-4V: tolerances, finishes and lead times to expect
- What to include in an aerospace RFQ so you get an accurate quote the first time
- How our AS9102 first article inspection works, step by step
- Inconel and other nickel alloys: when they're worth the machining cost
- Choosing a supplier for space hardware: speed, documentation and testing
- Nadcap explained for engineers and buyers new to special processes
Where to start: three fixes for this quarter
If you only do three things this quarter: put your AS9100 certificate and Nadcap accreditations on your homepage and a quality page with downloads, give each core capability its own page with materials, envelopes and tolerances, and change your RFQ form to take drawings, revision and quantity, with instructions for controlled data. Buyers will be able to verify you before they call.
You'll see which pages bring in aerospace and space RFQs
Every RFQ that comes in through your website, email or phone goes into the RFQ Engine, tagged with where it came from. Your RFQ Report shows how many arrived, how fast your team replied, how many were quoted and how many were won. For aerospace suppliers, we also track which capability and material pages bring in RFQs, so we know where to write next.
We agree an RFQ goal with you in month one and report against it. When something isn't working, you'll see it in the numbers before we tell you, and we change course.
Questions
Do I need AS9100 to market to aerospace buyers?
Not always, but many primes and tier 1 suppliers require it for production work. If you don't have it yet, we'll position you for the aerospace work you can win now, such as tooling, prototypes or non-flight hardware.
Can you write about our parts if they're under NDA?
We write about capabilities, materials and processes, not customer parts, unless you have written permission to share them.
Do you work with space companies?
Yes. Launch, satellite and space hardware companies search online and move fast, so a clear website and quick RFQ replies matter even more.
How long before an aerospace marketing program shows results?
The RFQ Engine improves your close rate within weeks. New search rankings usually take three to six months, and aerospace buyers often take months more to qualify a new supplier, so we plan for a longer horizon.
We also do commercial work. Will aerospace pages put other buyers off?
No. We give aerospace its own pages and keep your other industries visible. Most buyers see aerospace work as a sign of quality.